20
Materials
All materials offered by Builder, are optimized for 3D printing with the Builder Extreme range. The
materials that are currently available for the Builder Extreme, have been extensively tested to achieve
high quality print results. The materials work best in combination with Builders standard FFF profiles
for Simplify3D.
If you would like to use materials, which are not purchased through Builder, we would recommend
you to first make some smaller test prints. Every material can react different when printing with
Builders standard FFF profiles. You might need to adjust print temperature, bed temperature and
retraction.
We recommend you to store open filament spools at a temperature between 15 – 25 degrees at a
humidity below 30% and not indirect sunlight. Please make sure that opened filament spools are
stored properly. If materials are not stored correctly, it may affect the usability and quality.
If you would like to order filaments, please contact us through
