22
Maintenance schedule machine/print head
The maintenance schedule is based on a use of 3000 print hours per year. If your user frequency is
higher, we advise you to maintain the machine more often for optimal print results.
Before every print
Clean the printer
Keep the printer clean for optimal print results
Remove filament pieces from the build plate
Remove degraded materials from the nozzle
Remove thin pieces of filament from the fans
Checks
Check the adhesion layer on the bed
Check if the UPS is activated
Check if the correct nozzle is installed
Every month
Checks
Check fans on/underneath the print head work
Check if the filament detection works
Check if the Ups function works
Check if the emergency stop works
Every 3 months
Cleaning
Clean the extruder wheels
Clean the nozzle
Clean the filter in the control box (backside)
Apply grease on X/Y axis if needed (1000 hours)
Apply grease on Z axis if needed (2000 hours)
Every 6 months
Replace
Replace both motors on print head
Replace the nozzle
Apply a new layer of glue on the print bed
Replace the teflon tubes inside print head
Replace the extruder wheels
Every year
Replace
Replace the battery pack of the Ups system
Replace the filter inside the air filter
*If you would like to order replacement parts, please contact us through [email protected]
