13
Connect to WiFi
To connect the Builder Extreme to your WiFi network, please follow these steps:
1.
Go to settings, network, WiFi
2.
The Builder will now look for available WiFi networks
3.
Select the WiFi network you want to connect with and fill in your password
4.
The Builder is now successfully connected to your WiFi network
5.
Go back to the home screen and press on the WiFi icon. An IP address pops-up
6.
Type the IP address in your URL section and press enter. The screen below pops-up
The WiFi connection allows you to monitor the printing process from behind your desk. It shows
which file is printing, on what temperature and also shows which files are saved to the printers
memory. You can also monitor the print with the on-board camera.
We strongly advise to upload files bigger than 50 mb with an USB stick.
LAN connection
To connect the Builder Extreme with your network, please do the following:
1.
Connect the Ethernet cable to the back of the control box
2.
Go to settings, network, Ethernet and refresh
3.
The screen now shows the connection with Ethernet and an IP address pops-up
4.
Type the IP address in your URL section and press enter. The screen above pops-up
5.
You can now monitor the printing process
