Buick 2004 LeSabre Owner'S Manual Download Page 313

Page: 313 / 392

Removing the Spare Tire and Tools

The equipment you will need is located in the trunk.

1. Pull the carpeting from the floor of the trunk.

2. Lift and remove the cover.

3. Remove the compact spare tire. See Compact

Spare Tire on page 5-83 for more information
about the compact spare.

4. Unscrew the wing nuts to remove the container that

holds the wrench and jack.

5. Remove the wheel wrench, jack and the spare tire

from the trunk.

The tools you will be using include the jack (A) and the
wheel wrench (B).

5-75

Summary of Contents for 2004 LeSabre









































































































































































































































































































































































































Search results

Summary of Contents for 2004 LeSabre

Reviews:

Related manuals for 2004 LeSabre

Brands by name

Popular brands

Buick 2004 LeSabre, Owner'S Manual

Search results

Summary of Contents for 2004 LeSabre

Reviews:

Related manuals for 2004 LeSabre

Brands by name

Popular brands