Buick 2004 LeSabre Owner'S Manual Download Page 283

Page: 283 / 392

6. Connect the red

positive (+) cable to the
positive (+) terminal
of the dead battery.
Use a remote
positive (+) terminal
if the vehicle
has one.

7. Don’t let the other end

touch metal. Connect it
to the positive (+)
terminal of the good
battery. Use a remote
positive (+) terminal
if the vehicle has one.

8. Now connect the black

negative (

−

) cable to

the negative (

−

)

terminal of the good
battery. Use a remote
negative (

−

) terminal

if the vehicle has one.

Don’t let the other end touch anything until the next
step. The other end of the negative (

−

) cable

doesn’t go to the dead battery. It goes to a heavy,
unpainted metal engine part or to a remote
negative (

−

) terminal on the vehicle with the dead

battery.

5-45

Summary of Contents for 2004 LeSabre









































































































































































































































































































































































































Search results

Summary of Contents for 2004 LeSabre

Reviews:

Related manuals for 2004 LeSabre

Brands by name

Popular brands

Buick 2004 LeSabre, Owner'S Manual

Search results

Summary of Contents for 2004 LeSabre

Reviews:

Related manuals for 2004 LeSabre

Brands by name

Popular brands