Buick 2004 LeSabre Owner'S Manual Download Page 322

Page: 322 / 392

Never use these to clean your vehicle:

•

Gasoline

•

Benzene

•

Naphtha

•

Carbon Tetrachloride

•

Acetone

•

Paint Thinner

•

Turpentine

•

Lacquer Thinner

•

Nail Polish Remover

They can all be hazardous — some more than
others — and they can all damage your vehicle, too.

Do not use any of these unless this manual says
you can. In many uses, these will damage your vehicle:

•

Alcohol

•

Laundry Soap

•

Bleach

•

Reducing Agents

Cleaning the Inside of Your Vehicle

Use a vacuum cleaner often to get rid of dust and
loose dirt. Wipe vinyl, leather, plastic and painted
surfaces with a clean, damp cloth.

Cleaning Fabric/Carpet

Your dealer has cleaners for the cleaning of fabric
and carpet. They will clean normal spots and stains
very well.

You can get GM-approved cleaning products from your
dealer. See Vehicle Care/Appearance Materials on
page 5-90.

Here are some cleaning tips:

•

Always read the instructions on the cleaner label.

•

Clean up stains as soon as you can — before
they set.

•

Carefully scrape off any excess stain.

•

Use a clean cloth or sponge, and change to a clean
area often. A soft brush may be used if stains are
stubborn.

•

If a ring forms on fabric after spot cleaning, clean
the entire area immediately or it will set.

5-84

Summary of Contents for 2004 LeSabre









































































































































































































































































































































































































Search results

Summary of Contents for 2004 LeSabre

Reviews:

Related manuals for 2004 LeSabre

Brands by name

Popular brands

Buick 2004 LeSabre, Owner'S Manual

Search results

Summary of Contents for 2004 LeSabre

Reviews:

Related manuals for 2004 LeSabre

Brands by name

Popular brands