Buhler SCS 104, Installation And Operation Instructions Manual

Page: 44 / 75

AGF-FE-1, AGF-FE-2
6 Maintenance
During maintenance, remember:
– The equipment must be maintained by a professional familiar with the safety requirements and risks.
– Only perform maintenance work described in these operating and installation instructions.
– When performing maintenance of any type, observe the respective safety and operation regulations.
– Only perform maintenance when cool.
DANGER
The gas inside the filter, condensate and used filter elements may be caustic or corros-
ive.
Sample gas can be harmful.
a) Before maintenance turn off the gas supply and surge with air if necessary.
b) Exhaust sample gas to a safe place.
c) Protect yourself against toxic / corrosive gas during maintenance. Wear appropriate
personal protection equipment.
6.1 Replacing the filter element
CAUTION Gas leakage
The filter should not be dismantled under pressure.
Don’t use damaged parts again.
– Twist off the filter cover counter-clockwise.
– Remove the filter element and insert a new one.
– Check for leaks and replace, if necessary.
– Twist on filter cover clockwise and tighten hand-tight.
– Perform a leak test with suitable means.
NOTICE! Please observe legal regulations when disposing of filter elements.
8 Bühler Technologies GmbH BE410009 ◦ 04/2016