Bühler technologies TC-Double Plus, Installation And Operation Instructions Manual

Page: 31 / 49

TC-Double (+)
6 Maintenance
The basic version of the cooler requires no special maintenance.
However, it may have different options depending on the cooler model. In this case the following maintenance must be per-
formed regularly:
– Optional peristaltic pump: Checking hoses (see chapter Replacing the hoses of the peristaltic pump (option) [> page 33])
– Filter option: Checking the filter element (see chapter Replacing the filter element (option) [> page 34])
– Optional moisture detector: Calibrating the moisture detector (see chapter Calibration of the moisture detector (option) [>
page 34])
– Optional sample gas pump: Check valves for contamination. After 500 operating hours tighten the screws for the mounting
ring to 3 Nm. (see chapter Replacing sample gas pump inlet and outlet valves (optional) [> page 35])
During maintenance, remember:
– The equipment must be maintained by a professional familiar with the safety requirements and risks.
– Only perform maintenance work described in these operating and installation instructions.
– When performing maintenance of any type, observe the respective safety and operation regulations.
DANGER Electrical voltage
Electrocution hazard.
a) Disconnect the device from power supply.
b) Make sure that the equipment cannot be reconnected to mains unintentionally.
c) The device must be opened by trained staff only.
d) Regard correct mains voltage.
DANGER Toxic, corrosive gas/condensate
Sample gas/condensate may be hazardous to health.
a) If necessary, ensure a safe gas/condensate discharge.
b) Always disconnect the gas supply when performing maintenance or repairs.
c) Protect yourself from toxic/corrosive gasses/condensate when performing mainten-
ance. Wear appropriate protective equipment.
29 Bühler Technologies GmbH BE440021 ◦ 09/2021