Buffalo TeraStation HS-DTGL/R5 User Manual Download Page 47

Page: 47 / 84

Print Server (Settings)

A USB printer, plugged into a USB port on either

the front or the rear of your TeraStation, may be

used.as.a.

Windows Print Server

and/or an

Apple

Print Server

on your network by choosing

Enable

on this page as appropriate and then clicking

Apply

...

TeraStation supports most PostScript printers.

It doesn’t support bi-directional printers.
Non-PostScript printers are not supported

by Buffalo. You may be able to get enough

information from a printer’s documentation to

get it to work, but our technical support cannot

help you with this.
Multi-function (all-in-one) printers are also not

supported, and tech support cannot help you

configure them. When multi-function (all-in-

one) printers are attached to the TeraStation,

usually only the printing and fax functions

can be made to work. Other features, such as

scanning, probably will not function.

Summary of Contents for TeraStation HS-DTGL/R5





















































































Search results

Summary of Contents for TeraStation HS-DTGL/R5

Reviews:

Related manuals for TeraStation HS-DTGL/R5

Brands by name

Popular brands

Buffalo TeraStation HS-DTGL/R5, User Manual

Search results

Summary of Contents for TeraStation HS-DTGL/R5

Reviews:

Related manuals for TeraStation HS-DTGL/R5

Brands by name

Popular brands