Buffalo TeraStation HS-DTGL/R5 User Manual Download Page 21

Page: 21 / 84

1. Power Button.–.Press.and.release.the.Power.

Button to turn the TeraStation on. Hold it
down for 3 seconds to turn the TeraStation

off...

2. USB Ports

– USB ports on both front and

rear panels of the TeraStation may be used
to connect USB hard drives, a printer, or an

additional. TeraStation. to. your. TeraStation...
See

TeraStation Expansion

on page 20 for

more information on using TeraStation’s USB
ports.

TeraStation Diagram

3. Hard Drive Status

(also 5, 8, and 10) – This LED will glow green when the corresponding hard

drive is detected at boot, and will blink green when a disk check or format is in process. It will glow
red when the hard drive is 90% full or more, and blink red if there is a problem with the drive.

4. Hard Drive Access

(also 6, 7, and 9) – This LED will blink green when the associated hard drive

is accessed. During startup, it’s normal for all the lights on the front panel to light up in order,
producing a pinwheel effect.

Summary of Contents for TeraStation HS-DTGL/R5





















































































Search results

Summary of Contents for TeraStation HS-DTGL/R5

Reviews:

Related manuals for TeraStation HS-DTGL/R5

Brands by name

Popular brands

Buffalo TeraStation HS-DTGL/R5, User Manual

Search results

Summary of Contents for TeraStation HS-DTGL/R5

Reviews:

Related manuals for TeraStation HS-DTGL/R5

Brands by name

Popular brands