manualshive.com logo in svg

Buffalo Tech WPL-05G300 Series, User Manual, Page: 79 / 140

Share
Download
Buffalo Tech WPL-05G300 Series User Manual Download Page 79

WPL-05G300 Series User Manual

78

Chapter 3  Configuration

Save/Restore

Use this screen to save AirStation settings as a file, and restore them later.

Parameter

Meaning

Save current settings

Clicking [Save] will save the current configuration of the AirStation 
to a file. If the [Encrypt the configuration file with a password] 
option is checked, then the configuration file will be password 
protected with the current administrator password.

Restore Configuration from Backup 
File

Restore the configuration of the AirStation from a saved 
configuration file by clicking the [Browse...] button, navigating to 
the configuration file, and then clicking Restore. If the configuration 
file was password protected, then put a check next to [To restore 
from the file you need the password], enter the password, and click 
[Open].

Summary of Contents for WPL-05G300 Series













































































































































Reviews:

No comments