Buffalo Tech WLI-UC-GNM User Manual Download Page 44

Page: 44 / 90

Chapter 5 Client Manager

WLI-UC-GNM User Manual

Parameter

Meaning

Wireless Adapter

Displays names of currently used wireless devices.

Automatic Secure Setup

Clicking this will search for an AOSS or WPS compatable access
point to connect to automatically.

Advanced Setup

Click this to display the SSID/WPS-PIN selection screen (next page).

Options (Experts only)

Click this to specify whether you use AOSS or WPS (PBC) for
connection in Automatic Secure Setup. It displays the WPS-PBC/
AOSS selection screen.

Automatic Secure Setup and Advanced Setup

There are two ways to connect to an access point: automatic or manual. In the following wizard,
automatic setup will be reffered to as [AOSS/WPS] and manual setup will be referred to as [Advanced
Setup].

Summary of Contents for WLI-UC-GNM



























































































Search results

Summary of Contents for WLI-UC-GNM

Reviews:

Related manuals for WLI-UC-GNM

Brands by name

Popular brands

Buffalo Tech WLI-UC-GNM, User Manual

Search results

Summary of Contents for WLI-UC-GNM

Reviews:

Related manuals for WLI-UC-GNM

Brands by name

Popular brands