WLI-UC-GNM User Manual
74
Appendix
150 Mbps Mode settings
By default, the AirStation’s 150 Mbps mode is disabled. To enable it:
1. Click [Start] > [All Programs] > [BUFFALO] > [AirStation Utility] > [AirStation Bandwidth 20 or
40MHz Select Tool] and launch the utility software.
If you are using Windows 7 or Vista and see the message "A program needs your permission
to continue", click [Yes] or [Continue].
2. When the message "Now start the setup wizard of Bandwidth Select Tool" is displayed, click
[Next].
3. Click [Next].
4. When the message "Select wireless adapter" appears, select this unit and click [Next].
5. Select [Use 150Mbps Mode (40MHz)], and click [Next].
6. When the message "Wireless adapter setting is completed" is displayed, click [Exit to setup].
If you still cannot establish a 150 Mbps connection, check the settings for your access point.
