5 Putting into operation
54
R-220 Pro Continuous Operation Manual, Version A
5 17
Attaching and removing evaporating flasks
Evaporating flasks are available in different types and sizes to meet all kinds of application require-
ments However, the maximal load on the rotational flange must not exeed 20 kg!
!
CAUTION
Risk of minor or moderate injury by heavy weight of the evaporating flask
•
Clean and dry the exterior of the flask before installation and removal
•
Lift the flask carefully and avoid overexertion
•
Do not drop the flask
•
Savely support the flask at handling
•
Savely store the flask onto a matching flask ring or holder
•
Keep limbs out of crushing zone
!
WARNING
Risk of serious burns by hot heating bath content
•
Do not drop any parts into the heating bath
•
Wear protective clothes against hot liquid spills
a
b
c
a
Drive down the heating bath
b
Support the evaporating flask by hand or with the optional ‘Manual flask handler’ (order no
41400) Lift the lever of the snap flange See also section 5 18 for correct adjustment of the
lever tension!
c
Swivel out the right half of the snap flange
