manualshive.com logo in svg

Buchi Lyovapor L-200, Operation Manual, Page: 47 / 100

Share
Download
Buchi Lyovapor L-200 Operation Manual Download Page 47

Büchi Labortechnik AG

Operating Pro control panel | 7

Operation Manual Lyovapor™ L-200/L-200 Pro

47/100

Symbol

Description

Meaning

SKIP

[[Skip]]

Skips the current process.

DELETE

[Delete]

Deletes the selected entry.

COPY

[Copy]

Copies the selected method.

7.3

Other symbols on the control panel

Symbol

Description

Meaning

[Closed]

The assigned method is active and
cannot be changed.

7.4

Menu bar

The menus are represented by symbols on the menu bar. Navigation through the
menus is by the input controls.
The following menus are available:

Menu
symbol

Meaning

Submenu/Action

Start menu

—

Process control parameters

Favourites menu

—

Bookmarks for individual entry points

Method menu

—

For saving freeze-drying methods

—

Editing and activating freeze-drying
method

Configuration menu

—

Process settings

—

Settings

—

End point determination

—

Maintenance

—

Service

—

System information

Messages menu

—

Notifications

—

Journal

7.4.1

Start menu

On the 

[Start]

 menu, parameters can be set manually.

Setting parameters using the navigation control

u

Select a parameter by turning the navigation control.

ð

The control panel highlights the selected parameter in green.

u

Tap the function 

[Edit]

 on the function bar.

ð

The control panel highlights the selected parameter in black.

u

To increase or decrease the figure, use the dialog box with a numeric input.

Summary of Contents for Lyovapor L-200





































































































Reviews:

No comments