btsr SMART WARP Operating Manual Download Page 70

Page: 70 / 103

Error Counter Display (TS5/TS7)

SMART MATRIX

- 2-48 -

Error Counter Display (TS5/TS7)

This function allows you to display the error counters at creel level and at detailed level.

Press the indicated button to directly access the counters.

Select the desired creel.
The indicated values represent the sum of all errors (

TENS

H, TENS L, PEAK H, PEAK L, NOYARN

) referred to the

selected creel.

To view the details of errors related to the selected creel.

DETAILS

to view the errors in detail

CLEAR

to clear the errors counters

BACK

to return to previous screen

EXIT

to return to main menu

Details

Select the desired Column.

To view the details of errors.

To view the details of errors, Column by Column.

To continue with the detailed display at Row level.

Summary of Contents for SMART WARP








































































































Search results

Summary of Contents for SMART WARP

Reviews:

Related manuals for SMART WARP

Brands by name

Popular brands

btsr SMART WARP, Operating Manual

Search results

Summary of Contents for SMART WARP

Reviews:

Related manuals for SMART WARP

Brands by name

Popular brands