Input/Output Configuration on SM-DIN/Smart Matrix
SMART MATRIX
- 2-23 -
Input/Output Configuration on SM-DIN/Smart Matrix
This function allows you to configure the input/output signals of
all
the SM-DIN Boards (
BOARDS
option) as
normally open (
NO
) or normally closed (
NC
) contacts.
It also allows you to configure the output relay of SMART MATRIX terminal as normally open (
NO
) or
normally closed (
NC
) contact.
Enter the
SETUP
menu.
Select
I/O CONFIG
.
Select
BOARDS
.
Configure the input signals within the
IN
window and the
output signal within the
OUT
window, as
NO
or
NC
.
To activate the save function.
SAVE
to save the choice,
BACK
to return to the previous
screen without saving,
EXIT
to return to menu.
Select
MATRIX
.
SETUP
→
I/O CONFIG
Summary of Contents for SMART WARP
