btsr SMART WARP, Operating Manual

Page: 44 / 103

Options
SMART MATRIX - 2-22 -
Options
This function allows you to choose the desired operation modes for sensor numbering and for style
parameter settings.
Enter the SETUP menu.
Select OPTIONS .
Set DEVICE ID MODE as NORMAL or PROGRESSIVE
and STYLE EDITOR MODE as FAST/SLOW or SINGLE
( see the comment below )
To confirm the settings.
SAVE to save the settings, BACK to go back to previous
screen without saving, EXIT to go back to the menu
DEVICE ID MODE : (example with 3 creels and 120 total sensors)
NORMAL Sensor numbering within each creel Creel A: ID 1 ÷ 40
Creel B: ID 1 ÷ 40
Creel C: ID 1 ÷ 40
PROGRESSIVE Progressive sensor numbering Creel A: ID 1 ÷ 40
Creel B: ID 41 ÷ 80
Creel C: ID 81 ÷ 120
STYLE EDITOR MODE :
FAST/SLOW Possibility of using 2 different parameter sets, selectable with the FAST/SLOW
external signals
SINGLE Single parameter set utilization
For more details about FAST/SLOW signal synchronization, please refer to section 3 – System
Components and Configuration.
SETUP → OPTIONS