btsr SMART MATRIX QUILT, Operating Manual

Page: 47 / 75

Style Programming (TS5/TS7)
SMART MATRIX QUILT 2 - 27
Select the row PRX:P=1…
Set the desired values: TIMEOUT , Delay FAST
[PRXs] , Delay SLOW [PRXs] , PRESCALER .(For the
detailed meaning of these parameters, please refer
to section 3)
To confirm che desired option and return to previous
menu.
Select GROUP#1
Set the identification number of the last device
belonging to the first group (L1D2) and confirm.
To start setting the parameters related to group 1
(
GROUP #1 ).
Set desired values in the FAST window:
- Working Tens : = work tension [set point] [0.1
÷
4.000 gr]
-
LOW ( % ):minimum tension value, below which
an alarm will be generated
[-1
÷
-100% of the setpoint value]
- LOW ( ms ): running time with tension
≤
LOW
after which an alarm will be generated [10
÷
5.000 ms].
- Tol (Tolerance) : [1
÷
250] (*)
- HIGH ( % ): maximum tension value, above
which an alarm will be generated
[1
÷
999% of the setpoint value]
-
HIGH ( ms ): running time with tension
≥
HIGH
after which an alarm will be generated [10
÷
5.000 ms].
- Tol (Tolerance) : [1
÷
250] (*)
To move to the setting of parameters related to next
group (
GROUP#2 ) or to save the style to the
database once you have setup all the parameters.
(*) The alarm will be generated only if the contitions specified with LOW / HIGH (%) and LOW / HIGH (ms) parameters
persist for the number of PRX pulses specified with this parameter.
=alarm enabled
=alarm disabled