btsr SMART MATRIX QUILT, Operating Manual

Page: 28 / 75

Sensor Configuration and Numbering
SMART MATRIX QUILT 2 - 8
Sensor Configuration and Numbering
This function allows you to univocally identify each TS5/TS7 device connected to SM-DIN QUILT Boards.
Enter the SETUP menu.
Select TS/xx IDENT.
•
Point and select BOARDS NUMBER :
•
Set the number of SM-DIN QUILT Boards used [1..10]
•
Point the symbol of 1
st
Board.
•
Select the field indicating the number of sensors
connected to Board 1 (default 100).
•
Set the number of sensors actually connected to Board
1 (e.g. 12) and confirm.
•
Point the symbol of 2
nd
Board and so on for all the
Boards used.
Once you have configured all the Boards.
For instance, let suppose now to configure an application comprising 4 TS5 sensors only, distributed
along two needle bars (2 sensors per bar).
SETUP → TS/xx IDENT.