btsr SMART MATRIX QUILT, Operating Manual

Page: 29 / 75

Sensor Configuration and Numbering
SMART MATRIX QUILT 2 - 9
SAVE to save the settings.
•
Point and select MACHINE LEVELS .
•
Set the number of levels (needle bars) within the
machine (i.e., set 02).
•
Point and select DEV. PER LEVEL (number of sensors
for each level, i.e., set 02)(*).
To confirm the set values.
SAVE to save the settings and startup the numbering
procedure.
•
The example shown indicates that the numbering
(identification) procedure of the 4 configured sensors is
going to begin.
•
The display of SM-DIN Boards will show
•
The green led will flash on all sensors
•
Shim the touch light of the sensor corresponding to
LEVEL: 01 , DEVICE: 01 .
•
The sensor’s led changes from flashing green to red.
•
On SMART MATRIX display, the DEVICE and LEVEL
fields will automatically increase to select one-by-one the
sensors to be numbered.
•
Shim the touch light of the relevant sensor and continue
with the numbering of all sensors.
At the end of the numbering operation, the configuration
menu will re-appear.
To return to SETUP menu
(*) The totale number of configured devices ( MACHINE LEVEL X DEV.PER LEVEL ) must match the total
number of devices previously set on BOARDS CONFIGURATION screen. Otherwise a “ DEVICE NUMBER
MISMATCH ” error message will appear.