BTS TMJOINT User Manual Download

Page: 9 / 120

BTS

Biomedical

BTS

TMJOINT

icons, symbols and acronyms

the European Union (see Declaration of Conformity).

Symbol on the equipment:

CE mark with the code of the Notified Body. The CE mark certifies

that the product conforms to the Directive 99/05/EEC - R&TTE and

obtained the Expert Opinion by IMQ.

Symbol on the equipment and in the users’ instructions:

Symbol for the separate disposal of electrical and electronic equipment, in

accordance with Directive 2002/96/CE (WEEE).

The equipment belongs to Group 8 (medical equipment).

In force in the nations of the European Union, Norway and Switzerland.

Rx only

Symbol for prescription only. U.S. Federal law restricts this device to sale

by or on the order of a physician or properly licensed practitioner.

Summary of Contents for TMJOINT
























































































































Search results

Summary of Contents for TMJOINT

Reviews:

Related manuals for TMJOINT

Brands by name

Popular brands

BTS TMJOINT, User Manual

Search results

Summary of Contents for TMJOINT

Reviews:

Related manuals for TMJOINT

Brands by name

Popular brands