27
BTS
Biomedical
BTS
TMJOINT
system components
In any case, the Charger comes with an output short circuit
protection system also in case of reversed recharging poles.
To recharge connect all the probes that you would like to charge to the
Charger (follow the instructions described above) and connect the AC/
DC adaptor to the mains and turn on the switch located on the rear panel.
When the Charger is properly connected to the mains and has been turned
on, the status LED “Power” will show a steady GREEN light.
The charging status of the probes is indicated by the status LED of the
probes (see § “Wireless Probes”).
Note that inserting the EMG probes into the Charger when it is
on, these come in “Deep Sleep” mode.
It is necessary to reactivate the probes, prior to use them, using a
magnet.
Summary of Contents for TMJOINT
Page 1: ...version 3 0 0 user manual english BTS TMJOINT ...
Page 6: ......
Page 104: ......
Page 119: ......