BTS TMJOINT User Manual Download

Page: 33 / 120

BTS

Biomedical

BTS

TMJOINT

installation

Check that on the PC are installed the following two elements:

• “Microsoft.NET Framework 3.5” (for Windows XP) or

“Microsoft.NET Framework 4” (for the next versions);

• “PDF Creator 1.2.1” (disable the research for possible

updates)

In case they are not already on your PC please download

them from the Internet (they are free) and install them.

Hardware installation

After have performed all the steps above, it will be necessary to configure

the port for the USB receiver.

To set the characteristics of the receiver the system requires the

receiver to be connected to the PC via a USB port.

Then, clicking the mouse right button on “My Computer”, select

“Properties”, choose “Hardware” and then enter the “Device Manager”:

Summary of Contents for TMJOINT
























































































































Search results

Summary of Contents for TMJOINT

Reviews:

Related manuals for TMJOINT

Brands by name

Popular brands

BTS TMJOINT, User Manual

Search results

Summary of Contents for TMJOINT

Reviews:

Related manuals for TMJOINT

Brands by name

Popular brands