BTS TMJOINT User Manual Download

Page: 55 / 120

BTS

Biomedical

BTS

TMJOINT

guide to the use of BTS DCA

It is also possible to visualize the information of the session that contains
the selected trial by clicking on “Session information”.

“Close session information” close the panel.

Trial viewing and report generation area

The trial viewing and report generation area

is made of the following

panels:

- “Patient reports”: consists of a drop box menu containing all the saved

report of the selected patient.

After selecting a report from the drop box menu the “Open” button

became active.

By clicking the “Open” button the application for the PDF reading will

be loaded and the selected report will be visualized.

- “Trial to process”: this panel contains all the trials among whom selected

the trials for the report generation.

To insert a trial in the “Trial to process” panel is enough a double-click

on the trial from the tree of the selected patient and it will be added

immediately to the trial list.

Summary of Contents for TMJOINT
























































































































Search results

Summary of Contents for TMJOINT

Reviews:

Related manuals for TMJOINT

Brands by name

Popular brands

BTS TMJOINT, User Manual

Search results

Summary of Contents for TMJOINT

Reviews:

Related manuals for TMJOINT

Brands by name

Popular brands