BTS TMJOINT User Manual Download

Page: 17 / 120

BTS

Biomedical

BTS

TMJOINT

warnings

- Apply the probes only on undamaged skin.

- Only use CE branded probes and hypoallergenic double-sided

tape, compatible with the usage on undamaged skin for brief

periods of time.

- Periodically verify the integrity of the system and of its components.

- In case the device accidentally falls, tear of the probes or other

accidents always address authorized technical support.

- Do not undertake any kind of internal maintenance of the device:

in case of need always address to authorized technical support.

- The use of any components different from the original ones

declines the conformity of the device.

- The instrument must be used in a medical environment, since it

has a high level of sensitivity (measured voltage levels of between

1 microvolt and 6 millivolt).

- In addition to the users’ instructions, the prescriptions regarding

accident prevention and technical regulations regarding

occupational safety must also be complied with.

The appertaining national regulations and standards of the country

of use, with regards prevention of accidents and environment, are

an extension of the users’ instructions.

- TMJOINT is a device that is able to function CONTINUOUSLY,

Summary of Contents for TMJOINT
























































































































Search results

Summary of Contents for TMJOINT

Reviews:

Related manuals for TMJOINT

Brands by name

Popular brands

BTS TMJOINT, User Manual

Search results

Summary of Contents for TMJOINT

Reviews:

Related manuals for TMJOINT

Brands by name

Popular brands