![background image](http://html1.mh-extra.com/html/btm/ulbg-452-18/ulbg-452-18_manual_2825660008.webp)
BTM Scandinavia AB
●
Franska vägen 32
●
S-393 56 KALMAR
●
Tel: +46 480 868 75
2.4 Function description
The equipment is intended for joining steel. Material combinations accoding to
material list, see section 2.5
Clinh-Tools for this purpose isTog-L-Loc® 3,8.
The hand held unit power supply is done with a rechargeable battery The battery
capacity is approximately 200 strokes per charge. The battery can be recharged in
approximately 30 min.
The hand-held units weight is about 2,3 kg, which allows for use without a balancer.
Below is a general description of the steps involved in joining two plates/profiles with
Tog-L-Loc®
Pull the C-frame over the plates to be joined, place the punch and the die where you
want to clinch.
Press start button, hold down until the punch turns. The reversal takes place automatically
after reaching the moment.
Start
Summary of Contents for ULBG 452-18
Page 28: ...S 7 ...