BTM Scandinavia AB
●
Franska vägen 32
●
S-393 56 KALMAR
●
Tel: +46 480 868 75
3.5 Setting CT, Cap Thickness and BD, Button Dimension
Button diameter (BD) and Cap thickness (CT) is firmly adjusted by BTM before delivery. If these
measurements differ with more than +/- 0,3mm from the recommended values, check that the
punch and the die are flawless. Is it still anomalies, please contact BTM Scandinavia AB for
support.
3.7 Clinch parameters
Periodically check that CT (thickness of the button) and BD (button dimension) is consistent
with the values (JD, Joint data) Sample process sheet.
Summary of Contents for ULBG 452-18
Page 28: ...S 7 ...