Using an Infusion Stand or EKOS™ CU 4.0 Cart
36
Figure 30. Logo Screen (Shutting Down)
Caution
After each use, the Control Unit should be plugged into a hospital-grade
outlet to ensure the battery is recharged fully. Failure to plug in the AC
power after use could result in the battery not being fully charged and
delay of ultrasound therapy.
5.
The Connector Interface Cable may be stored on the side of the Control Unit
(see Figure 4). It is not recommended that the Connector Interface Cable be
placed on the side of the Control Unit during ultrasound therapy because the
cord lengths are restricted.
6.
See Maintaining the Control Unit section for instructions on cleaning and
storing the Control Unit.
Using an Infusion Stand or EKOS™ CU 4.0 Cart
During use or storage, the Control Unit can be attached to the custom designed
EKOS™ CU 4.0 Cart or an infusion stand that meets at least the minimum
specifications. Alternatively, the Control Unit can be placed on a flat table or cart.
Note: For more information on the EKOS™ Cart see the EKOS™ CU 4.0 Cart
Instructions for Use.
Note: EKOS™ CU 4.0 Cart may not be available in all geographic regions.
Summary of Contents for EKOS
Page 65: ...Symbols and Indicators 61 ...
