BTG EKOS Instructions For Use Manual Download Page 31 | Manualshive

Page: 31 / 71

BTG EKOS Instructions For Use Manual Download Page 31

Ultrasound Operation

27

Figure 13. Logo Screen (Starting)

Starting Ultrasound

The sterile, disposable EkoSonic™ Device is sold separately. Carefully read the

Instructions for Use that is provided with the device for a complete description,

instructions, warnings, cautions and specifications specific to the EkoSonic™ Device.

The Instructions for Use packaged with the EkoSonic™ Device may still reference the

previous Control System (PT-3B) and terminology. All EkoSonic™ Devices will function

as intended whether connected to a model PT-3B Control System or a Control System

4.0.

After the physician has placed the EkoSonic™ Device into the patient, do the following:

1.

If not already ON, press the

Power

button on the front of the Control

Unit.
When the Control Unit start-up is complete and if the Connector Interface

Cable is not connected, both channels are available to Activate (see Figure

14).

«
...
29
30
31
32
33
...
»

Summary of Contents for EKOS








































































Reviews:

No comments