VISIT BAOFENGTECH.COM AND MIKLOR.COM FOR DOWNLOADS AND HELP
15
transmitting. BOT: send ID code at Beginning of Transmit. EOT: send ID code at End of
Transmit. BOTH: send ID code at both beginning and end of transmit. (PTTID code
information can only be set by the PC software)
23.
[F Key] + [2] + [3
] : PTT-LT - PTT-ID transmit delay setting. (Delay Time range is 0-30
seconds.). This is the delay time before transmitting the PTTID
24.
[F Key] + [2] + [4]
: S-INFO - Signal information and automatic dialing memory. 1-15
group signal code/decode memory. The memory list is programmed through software.
25.
[F Key] + [2] + [5]
: EMC-TP - alarm mode settings. ALARM: turns on the alarm sound on
the device itself. ANI: Sends the Alarm and PTTID through the Transmitter. BOTH:
combines both of the options above.
26.
[F Key] + [2] + [6]
: EMC-CH - alarm channel setting. This is the channel that the alarm
will transmit the PTTID and Alarm sound on
27.
[F Key] + [2] + [7]
: RING-T - Ring time setting (Pager sound for optional signaling
channels). OFF: pager sound is disabled, or from Choose 1-10 seconds to set the ring
time on the pager when the radio optional signaling code is received.
28.
[F Key] + [2] + [8]
: CHNAME - channel name edit.
29.
[F Key] + [2] + [9]
: CA-MDF - Display Mode (upper) - FREQ: displays Frequency. CH:
displays channel number. NAME: displays assigned channel name.
30.
[F Key] + [3] + [0]
: CB-MDF - Display Mode (lower) - FREQ: displays Frequency. CH:
displays channel number. NAME: displays assigned channel name.
31.
[F Key] + [3] + [1]
: SYNC – When this is ON, the upper and lower displays are synced to
the same channel. (use in conjunction with Menu 29 and 30 to display the channel