VISIT BAOFENGTECH.COM AND MIKLOR.COM FOR DOWNLOADS AND HELP
25
Remote Revive
First set the DTMF Remote Revive Tone and Master Control ID in Software:
When your radio
receives the DTMF Remote Revive Tone Sequence (Set by software) (Requires Menu 20 and 21 to
accept DTMF signaling) it will reactivate the radio after it has been remotely stunned or killed. The
Master ID station must first identify and send the PTTID (set in software as “Master ID”) – once the
Master Station identifies itself, the radio is set to receive command tones, if the Monitor Remote
Kill tone is received - the radio will revived from a stun/kill command.
Both the master ID station
and remote stun signal must be set up in software.
DTMF Receive Settings, Transmit Setting (Call Key)
1.
Press [MENU] Key select 20 OPTSIG, press [F] Key select DTMF function.
2.
Press [MENU] Key select 24 S-INFO, press [F] Key select pre-code signal group (1-16). (The
DTMG Signal must be saved first in the PC software setting under DTMF.
3.
If properly set up (on Menu 20 and 24), your radio will open the squelch when it receives
the required DTMG signal.
4.
Press [Call] Key to send the same DTMF you have selected in Menu 24.
2TONE Receive Settings, Transmit Setting (Call Key)
1.
Press [MENU] Key select 20 OPTSIG, press [F] Key select 2TONE function.
2.
Press [MENU] Key select 24 S-INFO, press [F] Key select pre-code signal group (1-16). (The
2Tone Signal must be saved first in the PC software setting under 2TONE.
