VISIT BAOFENGTECH.COM AND MIKLOR.COM FOR DOWNLOADS AND HELP
13
on a per channel or VFO basis.
5.
[F Key] + [5]
: TOT - transmission time-out timer. Sets the maximum transmit time from
15 to 600 seconds (15 second steps).
6.
[F Key] + [6]
: APO – Auto Power Off powers off the radio after a predetermined time
with no receiver activity. (30 > 300 minutes)
7.
[F Key] + [7]
: WN - WIDE or NARROW band width settings (12.5/25khz).
8.
[F Key] + [8]
: ABR - LCD backlight time setting. OFF / 1-50 seconds.
9.
[F Key] + [9]
: BEEP - turns key beeps OFF or ON.
10.
[F Key] + [1] + [0]
: R-DCS - DCS receive/squelch settings. Options include the D023N-
D754N positive sequence and the D023I- D754I reversed sequence.
11.
[F Key] + [1] + [1]
: R-CTCS - CTCSS receive/squelch settings. Selectable from 67.0HZ-
254.1HZ. you can use the keypad to quickly enter in the desired setting
12.
[F Key] + [1] + [2]
: T-DCS - DCS transmit settings. Options include the D023N-D754N
positive sequence and the D023I- D754I reversed sequence.
13.
[F Key] + [1] + [3]
: T-CTCS CTCSS transmit settings. Selectable from 67.0HZ-254.1HZ.
you can use the keypad to quickly enter in the desired setting
14.
[F Key] + [1] + [4]
: DTMFST – DTMF transmit tone settings.
OFF
: No tones heard through the speaker when transmitting.
KEY
: Only manually
keyed DTMF codes are heard.
ANI
: Only automatically keyed DTMF codes are heard.
BOTH
: All DTMF codes are heard.
15.
[F Key] + [1] + [5]
: BCL - busy channel lock- out. If you have this turned on the
transmitter will not transmit if a channel is receiving at the time
