background image

TK-2302-1, TK-2302V-1 FCC ID:ALH413500  IC:282D-413500 

TK-3302-1, TK-3302U-1 FCC ID:ALH413600  IC:282D-413600 

INSTRUCTION MANUAL 

TK-2302(V)-1/TK-3302(U)-1 

THANK YOU!

 

We are grateful you chose 

KENWOOD 

for your land mobile radio applications. We believe this easy-to-use transceiver will provide 

dependable communications to keep personnel operating at peak efficiency. 

KENWOOD 

transceivers incorporate the latest in advanced technology. As a result, we feel strongly that you will be pleased with the 

quality and features of this product. 

 

NOTICES TO THE USER 

WARNING: 

**  

GOVERNMENT LAW PROHIBITS THE OPERATION OF UNLICENSED RADIO TRANSMITTERS WITHIN THE 

TERRITORIES UNDER GOVERNMENT CONTROL. 

**

I LLEGAL OPERATION IS PUNISHABLE BY FINE OR IMPRISONMENT OR BOTH. 

**  

REFER SERVICE TO QUALIFIED TECHNICIANS ONLY. 

**  

DO NOT OPERATE YOUR TRANSCEIVER IN EXPLOSIVE ATMOSPHERES (GASES, DUST, FUMES, ETC.). 

**  

TURN OFF YOUR TRANSCEIVER WHILE TAKING ON FUEL, OR WHILE PARKED IN GASOLINE SERVICE STATIONS. 

 

SAFETY:  

It is important that the operator is aware of and understands hazards common to the operation of any transceiver. 
 

WARNING: 

EXPLOSIVE ATMOSPHERES (GASES, DUST, FUMES, etc.) 
Turn off your transceiver while taking on fuel, or while parked in gasoline service stations. 
 

One or more of the following statements may be applicable: 

 

FCC WARNING 

This equipment generates or uses radio frequency energy. Changes or modifications to this equipment may cause harmful interference 
unless the modifications are expressly approved in the instruction manual. The user could lose the authority to operate this equipment if 
an unauthorized change or modification is made. 
 

INFORMATION TO THE DIGITAL DEVICE USER REQUIRED BY THE FCC 

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. 
These limits are designed to provide reasonable protection against harmful interference in a residential installation. 
This equipment generates, uses and can generate radio frequency energy and, if not installed and used in accordance with the 
instructions, may cause harmful interference to radio communications. 
However, there is no guarantee that the interference will not occur in a particular installation. If this equipment does cause harmful 
interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try 
to correct the interference by one or more of the following measures: 
• Reorient or relocate the receiving antenna. 
• Increase the separation between the equipment and receiver. 
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected. 
• Consult the dealer for technical assistance. 

Summary of Contents for TK-2302-1











Reviews: