22
VISIT BAOFENGTECH.COM AND MIKLOR.COM FOR DOWNLOADS AND HELP
UV-2501 / UV-5001
Press [F] Key + [2] Key + [0] Key + [F] Key + [UP] (DOWN) select [F] Key save the setting.
3. Set the Menu 22 settings to select when the PTTID is transmitted. Press [F] Key + [2] Key + [2] Key
+ [F] Key + [UP] (DOWN) select PTT-ID transmit time + [F] Key save setting.
4. Set the Menu 23 settings to program the PTTID transmit delay time. Press [F] Key + [2] Key + [3]
Key + [F] Key + [UP] (DOWN) select delay time + [F] Key save setting.
5.When all the settings are set, when you transmit (Press the PTT) The radio will transmit the
PTTID.
DTMF RX Settings
This radio has DTMF coding and decoding. Use the PC software to set the DTMF signal settings first.
When you receive the DTMF tones required the, radio will show the code on your display and
ring/page the radio (if you have Menu 27 set to ring the radio).
DTMF TX Settings
In two-way radio systems, DTMF is most commonly used for automation systems and remote
control. A common example would be in amateur radio repeaters where some repeaters are
activated by sending out a DTMF sequence (usually a simple single-digit sequence).
