BT VERVE 500 User Manual Download

Page: 9 / 88

Verve 500 – Issue 2 – Edition 2 – 19.10.06 – 7878

If you experience any problems, please call the Helpline on 0870 242 6652 or email [email protected]

Clock Setting

is displayed, press

to select.

3. The current time and date setting is displayed. Enter 2 digits

for the hour and 2 for the minute (e.g. for 2.15pm, enter

). The cursor moves across

automatically, now enter 2 digits each for the day, month and
year, e.g. for 6th May

2006

press , , , ,

then press

to confirm.

4. Press

to exit and return to standby.

BT Verve 500 multiple pack owners

For each additional handset:

1. Plug the power adaptor cable with the white connector into

the underside of the charger and plug the other end into the
mains wall socket and switch the power on.

2. Insert the batteries as described on page 7, point 2.

3. Place the handset in the charger and charge for at least

24 hours.

4. Any additional handsets that came with your BT Verve 500

are ready for immediate use and normally there is no need to
register them to the base. If you do need to register a
handset, please see page 33.

Your BT Verve 500 is ready for use.

The charge capacity of rechargeable

batteries will reduce with time as they

wear out, giving the handset less

talk/standby time. Eventually they

will need to be replaced. New battery

packs are available from the BT Verve

500 Helpline on 0870 242 6652.
After charging your handset for the

first time, subsequent charging time

is about 6–8 hours a day.
The battery and handset may become

warm during charging. This is normal.
If you subscribe to a Caller Display

Service from your network provider

the time will be set when you receive

your first call.
The default time setting is 12:01pm.

The default time setting is 1st January

2006 (01/01/06).

Getting started

You need to place your BT Verve 500

charger close enough to a mains

power socket so that the cable

will reach.

The power adaptor for the charger

and base are different. The power

adaptor for the charger has a white

connector and the power adaptor for

the base has a black connector.

Summary of Contents for VERVE 500

























































































Search results

Summary of Contents for VERVE 500

Reviews:

Related manuals for VERVE 500

Brands by name

Popular brands

BT VERVE 500, User Manual

Search results

Summary of Contents for VERVE 500

Reviews:

Related manuals for VERVE 500

Brands by name

Popular brands