34
Verve 500 – Issue 2 – Edition 2 – 19.10.06 – 7878
If you experience any problems, please call the Helpline on 0870 242 6652 or email [email protected]
3.
Handset Settings
is highlighted, press
OK
.
4. Press
UP
or
DOWN
to highlight
Register HS
.
5. Enter your 4 digit System PIN code, and press
OK
.
Registering …
is displayed.
At the base:
6. Press and hold
, until you hear a beep tone. Release the
button and the phone will remain in registration mode for 60
seconds while the handset attempts to register with the base.
When registration is successful, the new handset will
automatically be allocated the next available handset
number. This number will be shown in the handset display
when in standby mode.
Dim mode
With Dim mode set to on, after a pre-set period of inactivity,
the display backlight will reduce to 10%.
With Dim mode set to off, the display will go completely blank
after the pre-set period of inactivity.
When you press a keypad button, the display backlight will
come on as normal.
1. Press
Menu
to open the main menu.
2. Use the
NAVIGATION
buttons to highlight the
symbol
and press
OK
to select.
The default PIN code is 0000.
Press
to exit and return to standby
at any time.
When set to On, the handset uses
more power and so the talk and
standby times will be reduced.
Phone settings
