manualshive.com logo in svg

BT SYNERGY 1400, User Manual, Page: 41 / 66

Share
Download
BT SYNERGY 1400 User Manual Download Page 41

37

Press the 

➔

button several times until

display shows 

SET UP

.

Press the 

✔

button. Display shows 

HANDSET

.

Press the 

✔

button. Display shows 

LEVEL

.

Press the 

➔

button several times until

the display shows 

RESET

.

Press the 

✔

button. Display shows 

CONFIRM

.

Press the 

✔

button. Display shows 

CONFIRM

again.

Press the 

✔

button. Display shows 

REG

.

The handset is reset, and is now
de-registered from the base station(s).

This will reset:

RINGER VOLUME to high.
RINGER MELODY to A.
EARPIECE VOLUME (III).
KEYTONES to ON.
QUICKDIAL MEMORY to shared.

It will delete

Quickdial numbers stored in the 
personal memory.
Last number redial memory.
Personal emergency numbers.

Unchanged:

Quickdial numbers stored in the shared
memory.

You will now need to re-register your 
handset. Follow the instructions on 
page 46.

To reset your Synergy 1400 handset    
to its original settings

OPTIONAL SETTINGS

Switch off the mains power.

Press and hold down the 

PAGE

button.

Continue to hold down the 

PAGE

button while switching the mains 
power back on and for a further five 
seconds until the base station gives a 
confirmation beep. After another five
seconds a second confirmation beep 
will indicate that the base station reset 
is complete.

This will reset:

Base station PIN code to 

0000

.

DIAL DELAY to medium.
MESSAGE ALERT to OFF.
ANS MACHINE to ON.
TIME & DAY setting to 

SAT 12:01

.

RECALL MODE to TB.
RINGER VOLUME to high.
RINGER MELODY to A.

It will remove:

All handsets registered to the base 
station. All shared numbers stored in 
the memory. Clear all messages left or
recorded.

To reset your Synergy 1400 base    
station to its original settings

Summary of Contents for SYNERGY 1400



































































Reviews:

No comments