19
Handset display now shows
PLS LISTEN
.
Base station displays
PL
.
After a 2 second delay you will hear:
‘Your outgoing message is: ........’.
The recorded message is played back.
Base station displays current number
of messages stored, or
0
if there are
none, or
– –
if answer machine is
switched off. Handset displays
REC OGM
.
You have now successfully recorded
your first outgoing message.
Press and hold
✘
button to return to
standby immediately, otherwise wait 20
seconds, and it will return automatically.
With the handset display still showing
REC OGM
press
✔
button. Display
shows
ANS AND REC
.
Press
➔
button to toggle between
ANS
AND REC
and
ANS ONLY
.
When
ANS ONLY
is displayed press
✔
button. Display shows
PLS LISTEN
.
The Answer and Record symbol
appears in the display.
After 2 seconds the voice says
‘Please
speak after the tone. To end recording
press END (i.e.
✔
)’.
The Answer and Record symbol
and
END
appear in the display.
Base station display shows ‘r’.
Answer and Record (OGM 2)
ANSWERING MACHINE
PLEASE NOTE
You must have recorded your personal OGMs
otherwise your Synergy 1400 will use only the
factory pre-recorded messages, see page 17.
Now record your outgoing message,
then press
✔
button
Handset now shows
PLS LISTEN
.
Base station displays
PL
.
After a 2 second delay you will hear:
‘Your outgoing message is: .............’
The recorded message is played back
at this point.
Base station displays current number
of messages stored, or
0
if there are
none, or
– –
if answer machine is
switched off. Handset displays
REC OGM
.
You have now successfully recorded
the second of your outgoing messages.
Press and hold
✘
button to return to
standby immediately, otherwise wait 20
seconds, and it will return automatically.
PLEASE NOTE
You may change either of these messages at any
time, using the above procedure. You are not
required to record them both at the same time.
