BT PAPERJET 200, User Manual

Page: 20 / 49

17
Edition 1.4 – 25th October ’99
USING
Sending stops.
To eject the paper and return to standby.
Display shows
EJECT DOCUMENT
.
To stop a fax in progress
To send a fax
DOCUMENT
Load the document. Display shows
DOC READY
and the resolution setting.
You can change the resolution to suit
documents with fine text or photographs.
Change if necessary, see page 28.
KEYPAD
Dial the number. (Or use a
ONE-TOUCH
button or
DIRECTORY
.)
The document is scanned into the
memory and the display shows
SCAN #
*
.
The number is dialled. Display then
shows
CONNECTING
,
SEND
, etc. as in
the example below. When the last page
has been sent, the machine beeps and
returns to standby.
SEND = Sending
If
X
= E - error correction mode
If X = blank – no error correction
96 = transmission speed
96 = 96000bps,
72 = 7200bps
S = send resolution
standard,
F = fine,
P = photo
#01
= page 1
#01/02 = page 1 of 2
Direct sending
If the document you want to send is too
large for the memory, or a delayed send
fax is already programmed, you will have
to send the document directly from the
document feeder.
To send direct from the document feeder,
load the document. Display shows
DOC. READY STD.
Press MONITOR button. Display shows
FAX NO.
Dial number.
Press
START
. The fax is sent without
first scanning to memory.
SEND X96 S #01/02
Please note
If a fax has been stored in memory for delayed
sending, the new fax will not be scanned into the
memory and the display will show CANCEL
DELAYED TX
? If you press START , the delayed
send fax will be deleted and the new fax scanned
into memory before sending. If you press
STOP
the delayed send fax will be retained and the
new fax sent directly from the document feeder.
PaperJet 200 25/10/99 6:39 pm Page 17