Your name and fax number can be printed at
the top of each page you send. This is called
your sender ID.
To enter your sender ID
•
Press the
SET UP
button until the display
shows
USER SET UP
.
•
Press the
button to display
SET USER
INFORMATION
.
•
Press the
button to display
ENTER
SENDER ID
.
•
Press the
button to display
ENTER ID NAME
.
•
Use the keypad to enter the name you want
to appear on the fax heading, overwriting
the default name
IMAGE 2001
. You can enter
a name of up to 20 characters.
For example, to enter the name JOHN:
•
Press the
5
button until the display shows
J
•
Press the
6
button until the display shows
O
•
Press the
4
button until the display shows
H
•
Press the
6
button until the display shows
N
•
When you have entered your name, press
the
button to confirm. The display
shows
ENTER ID FAX NO
.
STOP
SET UP
Setting up
10
STOP
SET UP
•
When asked, select the connect Port LPT 1.
This is the standard setting. You are offered
the standard settings throughout
installation. Unless you specifically want a
different setting, always click OK when asked.
•
When the Printer Driver installation is
finished, click OK.
To install the Unimessage software
Before you install Unimessage, you must
have installed the printer driver software,
as shown opposite.
•
Insert Unimessage Disk 1 of 3.
•
Click on Start
•
Click on Run. The box shows
a:\SETUP.EXE.
•
Click OK and follow the on-screen prompts.
•
When installation is complete you are asked
to restart your computer. Take the last
Unimessage disk from the A drive and
restart your computer.
10 Entering your sender ID
There are 3 standby modes indicated by
the following messages in your display.
•
Faxes in memory
•
Timed Jobs
•
Messages
Use the
©
button to move forward through the
display. Use the
§
button to delete characters.