43
Using the telephone,
fax and copier
Setting the incoming fax size
Your Image 2001 is pre-set to slightly reduce
incoming faxes to fit onto a smaller page area.
Documents can also be received normal size.
The available settings are:
NORMAL (default setting)
Incoming faxes are automatically reduced to
ensure each page received fits onto one sheet
of paper. If the original document page length
is more than 1
1
/
2
times the set paper length,
then the document will be printed on two sheets.
CUT OVER LENGTH
In this mode, faxes are printed full size in the
vertical direction with a slight reduction in the
horizontal direction. If the page length of an
incoming fax is longer than the paper you are
printing on, your Image 2001 will not print
anything that is over the set length of the page.
FULL LENGTH
In normal mode, faxes are printed out full size
in the vertical direction with a slight reduction
in the horizontal direction. This means that if
the sender’s ID information is set to OUTSIDE,
the fax may go over onto a second sheet.
To change the incoming fax size
•
Press the
SET UP
button until the display
shows
USER SET UP
.
•
Press the
button . Display shows
SET
USER INFORMATION
.
•
Press the
©
button until the display shows
SET UP FAX FUNCTIONS
.
•
Press the
button. Display shows
ACTIVITY REPORT
.
•
Press the
©
button until the display shows
SET PRINT MODE
.
•
Press the
button. Display shows
NORMAL.
•
Use the
©
button to display the available
options -
NORMAL
,
CUT OVER LENGTH
,
FULL LENGTH
.
•
Press the
button to confirm the option
you want. Display shows
RESOLUTION
DEFAULT
.
•
Press the
STOP
button until the display
returns to standby.
SET UP
STOP