Freelance 501 – Edition 3 – 10.07.06 – 7557
39
Call the Helpline on
0870 605 8047
or
email [email protected]
General information
Only use the approved charger mains
power supply, item code 028772 (BT
Freelance 501 multiple pack users
only).
Only use approved AAA NiMH
rechargeable batteries.
R&TTE
This product is intended for use within
the UK for connection to the public
telephone network and compatible
switchboards.
This equipment complies with the
essential requirements for the Radio
Equipment and Telecommunications
Terminal Equipment Directive
1999/5/EC.
Declaration of Conformance
Hereby, Suncorp Technologies,
declares that this BT Freelance 501 is
in compliance with the essential
requirements and other relevant
provisions of Directive 1999/5/EC.
The Declaration of Conformance for
the BT Freelance 501 is published on
the website:
http://www.suncorptech.com/bt
Switchboard compatibility
This product is intended for use within
the UK for connection to public
telephone network and compatible
switchboards, which support tone
dialling and timed break recall. If in
doubt please consult your network
service provider.
Switchboard external line access
code
You may need to enter an access code
(e.g. 9) in order to get an outside line.
So that the switchboard has time to
pick up an outside line, you may also
need to add a Pause after the access
code.
A Pause lasts 3 seconds. You can
Pause dialling at any time by pressing
the P button.
To insert a pause
Begin storing a number and press
where a pause is needed.
P
is shown
in the display.
For more information on storing
numbers see ‘Store a phonebook
number’ on
page 16
.
Recall
The
button is used when
connected to certain switchboards,
e.g. to transfer calls, and for some
BT Calling Features or those services
available via your network provider.
Dialling mode
For instructions on how to change
the dialling mode, refer to the section
‘To change the phone settings’’
on
page 21
.
R
Int
Redial
Pause
