BSS Audio FPC900r, User Manual

Page: 8 / 78

VARICURVE
8
TM
S Y S T E M
2.0 Installation
As part of BSS Audio’s policy of quality control, this product is
carefully checked before packing to ensure flawless appearance and
that it reaches you in first class condition.
After unpacking the two units, please inspect them for any physical
damage. If any damage has occurred, notify your dealer immediately.
A written claim for damages can then be initiated. The Warranty at the
end of the manual gives more information (
see section 18.0 ).
Please retain the shipping carton and all the packing materials for use
should the unit need to be transported or returned for any reason.
The FPC-900i interface requires a vertical rack space of 1U (1.75" or
44mm). The unit should be supported at its rear by additional bracing
or shelving if it is to be used in a transportable system. Failure to do so
will impair the reliability and may possibly invalidate the warranty.
Figure 2.1 details the relevant dimensions and fixing centres for the
FPC-900i.
Adequate ventilation must be provided by allowing sufficient space
around the sides and rear of the FPC-900i to ensure free circulation of
air. Forced cooling is not required.
The FPC-900r remote is intended to be portable and has no particular
mechanical requirements. Care should be taken to ensure that the
remote is properly cushioned in transit. The unit should be kept in the
carry case provided and transported securely to prevent movement and
heavy impacts.
Figure 2.2 details the overall size of the FPC-900r.
2.1 Unpacking
2.2 Mechanical
Requirements
Fig 2.1 Overall
dimensions of the
FPC-900i Interface
Installation