BSS Audio FPC900r, User Manual

Page: 27 / 78

27
4.0 Selecting a Device
Selecting a Device
Numeric Keys
Press a Device key to select an individual device or channel.
Press both Device keys on the selected device to change a
device from Dual to Stereo, or from Stereo back to Dual.
Quick Reference
The 16 pairs of Device keys on the left hand side of the Remote are
used to select between the devices connected to the system. The key
numbers - from 1 to 16 - relate directly to Midi Channel numbers.
Think of the Device keys as 'steering' the controls and display to any
device or channel.
If a Varicurve device is in Stereo or 12 band Mono mode, pressing
either of the Device keys will select that device. In Dual channel mode
each of the Device keys will select one of the two Varicurve channels
in a device.
Refer to section 17.0 for information on controlling the
FDS-388 Omnidrive.
Note: Pressing a Device key will cause a Response message to be
displayed on any devices connected to that Midi channel.
Each Varicurve device can be changed between Mono, Dual and
Stereo modes from the remote.
Only the left hand channel led will be lit in Mono mode. Up to 12
filters are available for adjustment. The STATUS box at the top right of
the screen will show MONO unless a higher priority message is being
displayed. Switching a device to and from mono can only be done by
selecting the UTILITY menu and adjusting the MONO item.
Refer to
Section 9.2 ‘Utilities’.
In these modes each channel has six filters available. Dual mode
allows the two channels in a single device to be adjusted
independently of each other. Linking them in Stereo causes the filters
in each channel to track the corresponding filters in the other channel.
In Stereo, both channel curves are displayed together.
To switch between Dual and Stereo simultaneously press both of a
device’s Device keys. Both of the device channel leds will be lit in
Stereo mode.
4.1 Device Keys
Mono
Dual and Stereo