BSS Audio FPC900r, User Manual

Page: 39 / 78

39
PINK Turns the interface pink noise output on and off.
LOKOUT
Locks out various controls on the Remote to prevent tampering.
MORE Returns to the main UTILS menu.
(Channel) [Adjust value -6.0S to +6.0S]
FADE adjusts the crossfade time of the Varicurve program changes.
Positive fade time is the time taken for one EQ contour to be faded
down and the replacement contour faded up. Negative fade time will
merge from one EQ contour into the new one. Cross fading only
applies to program recall.
(Channel) [Adjust value -12dB to +12dB]
This item adjusts the overall gain of the current Varicurve channel.
Adjust the input gain from -12dB to +12dB in 0.5dB steps. When an
EQ is stored into a program memory this gain value is also recorded. In
stereo mode, both channels are adjusted simultaneously whilst keep-
ing any gain offset between them constant.
When extreme EQ contours have been set, it may become necessary to
restore the correct operating level by adjusting input gain.
(Channel) [ON, OFF]
This selects the configuration of the filters within a Varicurve device.
With MONO set to ON, all 12 filters are assigned to Channel 1. With
MONO OFF the filters are split between two 6 filter sets.
When MONO is OFF, use the Device keys to select whether the de-
vice is in Dual or Stereo modes.
Refer to Section 4 ‘Selecting a Device’ to read more about switching
between Stereo and Dual modes.
Programs stored in any one of these modes will not be available for
recall if the device is switched to a different mode.
Following each menu item name is the area of the system that it ap-
plies to. These area references are duplicated in the bar across the top
of the menu items. Items marked Channel will affect the Varicurve
device currently selected. Items marked Remote will only affect the
remote or its interface.
Pressing a Device Key will change the currently selected channel
whilst keeping the same Menu and Item selected on the screen.
9.2 Action of
Utilities
FADE
GAIN
MONO