BSS Audio FPC900r, User Manual

Page: 33 / 78

33
Quick Reference
1 Press STORE.
2 Turn the Parameter control to select a program
number.
3 Enter a name, if required, using the numeric keys.
4 Press STORE a second time to complete the Store
function.
There are 50 program memories available in each Varicurve device, all
of which are available at the FPC-900 Remote. Each program memory
consists of the filter parameter settings along with the device input gain
settings, peak fix status and access mode (Stereo/Mono/Dual).
Store will not store programs on an Omnidrive device. Omnidrive
programs must be stored in the Omnidrive itself.
In addition to the 50 device program memories, there are 12 special
program memories within the Remote designed for the storage of
Room Curves. These are named R1 to R12 and follow on from
program 50. Room Curves are equalisation curves produced from RTA
measurements and are a record of the equalisation characteristics of an
acoustic environment such as a studio, theatre or concert hall. Room
Curves are produced by the Room Curve function in the RTA menu
and are used by the Auto EQ function to reproduce the same response
in another location. It is also possible to create Room Curves manually
and Store them in locations R1-12.
Refer to Section 12.0 - ‘Make and Add Curve’ and Section 13.0 -
'Auto EQ'.
The first press of the STORE button changes the Program box in the
status bar to indicate the destination program number for the current
EQ.
(See figure 6.1).
6.0 STORE
STORE
Fig 6.1
Storing a program
NOTE: