BSS Audio FPC900r, User Manual

Page: 55 / 78

55
[Select to begin copy]
All the program changes linked to each device will be copied into the
destination Event along with the source program name.
When all changes have been made to your Events, return to the Event
Select menu by choosing DONE. All changes will have automatically
been saved.
Event Select Menu
Fig. 14.2 Event Select
Triggering Events
COPY
DONE
STEP
The figure below (fig 14.2) shows the main Event Select screen.
Select this item to enter the Event Edit menu.
If this box is ON, the Event key can be used to step through Events
Selecting DONE will return to filter editing.
The first seven boxes detail seven of the 50 available Events. After an
Event has been triggered, these seven boxes will be centred on the last
triggered Event. Below the Event numbers are the user defined Event
names. The last triggered Event is always marked with the word ‘LAST’
alongside the Event number. To scroll through all 50 Events turn the
parameter control. The events available along the speed strip will
scroll as the control is turned.
14.2 Event Select
Menu
EDIT
DONE
STEP
14.3 Triggering
Events
Any of the seven Events visible above the menu can be immediately
fired by selecting it with the speed strip. Alternatively the Event key
itself can be used to trigger Events by enabling STEP.
[OFF, ON]
With STEP selected to ON, the EVENT key can be used to step
sequentially through the programmed Events. This is useful if a show
has been built up which only requires each Event to be actioned in
numerical order. Once enabled the Event led will flash. Each press of
the EVENT key will now step to the next Event. This facility is not
available outside of the Event Select menu.