INSTALLATION - FINAL TESTS
Before testing, double check all your connections:
•
Handlebar Control Unit
•
Left LED units
•
Right LED units
With this bSeen X kit, the functions you will find on your Handlebar Control
Unit are:
•
Left Turn
•
Right Turn
•
Hazard Lights
•
Presence/Daytime Lights
Headlight and horn switches are activated, and can be used at any time if
you upgrade your system.
To test the functions and LED units, press “Left Turn” on your Handlebar
Control Unit. Now, both left indicators (front and rear) should blink, and a
green monitor LED on your Handlebar Control Unit should lite up.
Press again to switch off the “Left Turn”, and repeat the steps for the “Right
Turn”.
To activate the hazard lights, switch ON both “Right Turn” and “Left Turn”.
All 4 LED units should blink at the same time.
To activate presence/daytime lights, switch ON the headlight button. While
headlights are ON, you can still use the indicators. If you select one of the
indicators (L or R), the correspondent front LED unit starts blinking.
’s Battery Pack
Summary of Contents for X E-bike
Page 1: ...X e bike Owner s Manual...
Page 26: ...e BX V1 0 2019...
