INSTALLATION - CONNECTIONS - BATTERY
bSeen can be plugged directly onto the e-bike’s battery output voltage.
bSeen’s voltage regulator, can support input voltages
from 18V to 78V
and it’s electronically protected against short circuits, overloads and
overheat.
On this example we used a
Bosch
battery system, using the battery’s
charger port to feed bSeen’s ECU. Use bSeen’s loose power cable,
supplied with the kit.
ATTENTION - DISCLOSURE
Before proceed with the steps below, please make sure you have the
right credentials or skills to handle with electric/electronic circuitries.
The process shown on this manual’s section, it’s only an example on how
bSeen ECU can be plugged onto an e-bike’s battery system, and does
not consist any standard practice. Battery systems differ from from e-
bike to e-bike, and your battery pack can be different from the one
shown here.
The process described below involves a professional soldering method,
and if you’re familiar with it, please ask support from your e-bike dealer
or an automotive electrician expert.
bSeen, will not be liable for any damage caused to your vehicle, and all
connections are made at owners’ responsibility.
ATTENTION
Remove the battery from your e-bike before proceed.
Summary of Contents for X E-bike
Page 1: ...X e bike Owner s Manual...
Page 26: ...e BX V1 0 2019...
